HOME COMPANY PRODUCTS LOCATION CONTACT
Jacuzzi
Franklin Electric
4" Submersible Motors
6" Submersible Motor
Speed
Aqua-Pod2
Super Hurricane
  • Franklin's single phase submersible control boxes are suitable for outdoor mounting with operation over temperature range of +14° F to + 122° F
  • Start and run winding overloads protect the motor from failure due to abnormal operating conditions
  • Available in 5-15 HP ratings, the DELUXE Control box with a magnetic line contactor eliminates the need for auxiliary contactors and heavy duty pressure switches
  • A heavy duty terminal strip with box type lugs makes it easier to install up to #2 AWG wire
  • Ground screws provide a means for grounding the control box to the power supply ground
 
These motors are built for dependable operation in 6 diameter or larger. Temperature and time rating continuous in 86°F (30°c) water at 1/2 ft./sec. Flow past motor. Rotation: single-phase, CCW facing shaft end; three-phase electrically reversible.

For furture information, refer to Service Data Page 263 SD-"Submersible Motors: Application, Installation, Maintenance Manual."
 
  • Corrosion-Resistant Construction
  • Stainless Steel Sploined Shaft
  • Hermetically-Sealed Windings
  • Anti-Track Self Healing Resin System
  • Water Lubrication
  • Filter Check Valve (Water Well)
  • Kingsbury-type Thrust Bearing
  • Pressure Equalizing Diaphragm
  • Sand Fighter Slinger
  • Removable Water-Bloc Lead Installed in Water Well Motors. (Consult Factory For Additional Leads.)
  • NEMA Mounting Dimensions
 
  • Ni-Resist: Special construction option for some Salt Water and high pH applications
  • #316 Stainless Steel: Special construction option for Acid, low pH, and Seawater applications
  • World Wide Adaptability: All standard voltage and hertz ratings are offered. Consult Factory for availability. 3 lead configuration is suitable for reduced-voltage auto-transformer starting. Three phase motors are also available in 6 lead Wye(Star) Delta configuration
  • Subtrol Plus: Subtrol Plus sensors are standard in three phase motors rated 40-60 hp and optional in the 5-30 hp ratings. The Subtrol Plus system offers enhanced protection against overloads, underloads, overheating, and rapid cycling
 
Single Phase Capacitor start, capacitor run (control box required)
    Water Well
"L" Dim.
Ni-Res, 316S.S.
"L" Dim.
Shipping Wt.
hp kw ins cm ins cm lbs kgs
5 3.7 25.44 64.6 25.03 63.6 112 50.8
7 1/2 5.5 28.00 71.1 27.59 70.1 124 56.3
10 7.5 30.56 77.7 30.15 76.6 140 63.5
15 11.0 33.13 84.2 32.72 83.1 154 69.9
Three Phase
5 3.7 22.88 58.1 22.47 57.1 98 44.5
7 1/2 5.5 24.19 61.4 23.78 60.4 106 48.1
10 7.5 25.44 64.6 25.03 63.6 114 51.7
15 11 28.00 71.1 27.59 70.1 128 58.1
20 15 30.56 77.6 30.15 76.6 142 64.4
25 18.5 33.13 84.2 32.72 83.1 154 69.9
30 22 35.69 90.7 35.28 89.6 168 76.2
40 30 40.81 103.7 40.40 102.6 202 91.6
50 37 55.31 140.5 55.72 141.5 300 136.1
60 45 61.31 155.7 61.72 156.8 330 149.7
60 Hz - Nominal 3,450 RPM
50 Hz - Nominal 2,875 RPM
Component Environment Type
Standard
Water Well
Saltwater
(Ni-Resist)
Chemical
(316 S.S.)
1. Castings Gray Iron Ni-Resist Type 1B 316S.S.
2. Stator Shell 301S.S. 316S.S 316S.S
3. Stator Ends Low Carbon Steel 316S.S. 316S.S.
4. Shaft Extension 303 S.S., Except 17-4S.S. On 40-60hp 17-4S.S. 17-4S.S.
5. Fasteners 300&400 Series S.S. 316S.S. 316S.S.
6. Seal Cover 304S.S. & Sintered Bronze 316S.S. 316S.S.
7. Seal Carbon/Ceramic Face Carbon/Ceramic Face Carbon/Ceramic Face
8. Diaphragm Nitrile Rubber Nitrile Rubber Nitrile Rubber
9. Diaphragm Plate 304S.S. 316S.S. 316S.S.
10. Diaphragm Spring 302S.S. 17-7S.S. 17-7S.S.
11. Slinger Nitrile Rubber Type 100 Hydrin Type 100 Hydrin
12. Lead Wire (or Cable) RHW Lead Sold Separately Lead Sold Separately
13. Lead Potting Epoxy Epoxy Epoxy
14. Filter Delrin & Polyester 316S.S. Plug 316S.S. Plug

Specification subject to change without notice. Contact F.E. if current material types are required for bid specifications.
 
 
   
All rights reserved. Term and Conditions. Privacy Policy
See Dimensions